Open new doors with the efficiency, savings and comfort of geothermal.

Commercial series logo

Heating and cooling solutions for industrial, institutional and commercial settings need to be reliable, efficient and affordable. Hydron Module geothermal has a complete line of commercial heat pumps that meet those needs.

Hydron Module focuses on continuous improvement and quality control make reliability one of the greatest assets of our products. The innovative features you'll find in our equipment today started with a single goal in mind — to solve a problem — to be more efficient, quieter, smaller, easier to install, easier to service and to last longer.

No matter what your application, look to Hydron Module geothermal as the best choice for commercial heating and cooling solutions.

Origin zszt

ZS/ZT   |   Single or Two-Stage Compact Horizontal Packaged Unit

The all-new Commercial Series Compact Horizontal Packaged water source heat pump features a smaller footprint to fit between 24" O.C. trussing. The unit is field convertible for side or end discharge. It's designed for enhanced serviceability, superior efficiency, and quiet operation.

  • Capacity: 1.25 to 6 tons
  • Efficiency: Up to 29.8 EER / 4.7 COP
  • Voltages: 208/230V, 60Hz, 1Ph/3Ph; 265V, 60Hz, 1Ph; 460V, 60Hz, 3Ph
  • All-aluminum microchannel air coil
  • Foam enclosed braze plate heat exchanger
  • Freeze protected flow switch and sensor

Stratus vsvt

VS/VT   |   Single or Two-Stage Compact Vertical Packaged Unit

Hydron Module VS/VT compact vertical models provide forced-air heating and cooling with outstanding performance, whisper-quiet operation and a small footprint. They're available in single and two-stage configuration, in a variety of tonnages to fit any installation.

  • Capacity: 3/4 to 6 tons
  • Efficiency: Up to 28.3 EER / 5.6 COP
  • Full selection of commercial voltages
  • Single or two-stage compressor
  • PSC or ECM blower motor
  • Factory installed desuperheater option

Evolution yt

YT   |   Two-Stage Multi-Position Vertical Packaged Unit

The Hydron Module Commercial Series YT geothermal system delivers ducted, forced-air heating and cooling. YT models are among the most efficient models and feature whisper-quiet operation. An innovative multi-positional cabinet is field convertible to right or left return with top or side discharge.

  • Capacity: 2 to 6 tons
  • Efficiency: Up to 31.3 EER / 5.1 COP
  • Full selection of commercial voltages
  • Copeland UltraTech® two-stage compressor
  • ECM blower motor
  • Factory installed desuperheater option

Revolution xt

XT   |   Two-Stage Multi-Position Vertical Packaged Unit

The Hydron Module Commercial Series XT geothermal system is a forced-air heating and cooling system that has high performance and built-in versatility. The innovative multi-positional cabinet is field convertible to upflow/downflow with right or left return and makes the XT easy to install and stock.

  • Capacity: 2 to 6 tons
  • Efficiency: Up to 35 EER / 5.4 COP
  • Voltages: 208/230V, 60Hz, 1Ph/3Ph; 460V, 60Hz, 3Ph
  • Copeland UltraTech® two-stage compressor
  • ECM blower motor
  • Factory installed desuperheater option

Revolution ct

CT   |   Two-Stage Multi-Positional Hydronic Vertical Combination Unit

A Hydron Module Commercial Series CT combination geothermal unit has the flexibility to provide forced air heating, forced air cooling, and hot water for radiant floor heating.

  • Capacity: 2 to 6 tons
  • Efficiency: Up to 32.7 EER / 5.2 COP
  • Voltages: 208/230V, 60Hz, 1Ph/3Ph; 460V, 60Hz, 3Ph
  • Copeland UltraTech® two-stage compressor
  • ECM blower motor
  • Factory installed desuperheater option

Revolution ws

WS   |   Single-Stage Water-to-Water Unit

Hydron Module's WS & WD single-stage water-to-water models are designed to supply heated or chilled water for use in a wide range of heating and cooling applications, including radiant floor heating. These systems utilize brazed-plate heat exchangers for superior efficiency.

  • Capacity: 3 to 10 tons
  • Efficiency: Up to 24.0 EER / 4.1 COP
  • Voltages: 208/230V, 60Hz, 1Ph/3Ph; 460V, 60Hz, 3Ph
  • Copeland single stage scroll compressor
  • Thermostatic expansion valve
  • Factory installed desuperheater option

Revolution wd

WD   |   Two-Stage Water-to-Water Unit

Commerical Series WD water-to-water models feature dual compressors to provide two-stage heating and cooling. Hydron Module large hydronic models supply heated or chilled water for various applications, including radiant floor heating. These systems utilize brazed-plate heat exchangers for superior efficiency.

  • Capacity: 20 and 30 tons
  • Efficiency: Up to 21.8 EER / 4.3 COP
  • Voltages: 208/230V, 60Hz, 1Ph; 208/230V, 460V, 575V, 60Hz, 3Ph
  • Dual Copeland single stage scroll compressors
  • Thermostatic expansion valve
  • Factory installed desuperheater option

Revolution wt

WT   |   Two-Stage Water-to-Water Unit

Hydron Module two-stage water-to-water models are designed to supply heated or chilled water for use in a wide range of heating and cooling applications, including radiant floor heating. These hydronic systems allow for constant and uniform heat distribution that eliminates hot and cold spots. The system is also reversible and capable of providing chilled water for air conditioning.

  • Capacity: 3 to 12 tons
  • Efficiency: Up to 24.5 EER / 3.8 COP
  • Voltages: 208/230V, 60Hz, 1Ph (3-10 ton models only); 208/230V, 60Hz, 3Ph; 460V, 60Hz, 3Ph
  • Copeland UltraTech® two-stage compressor
  • Factory installed desuperheater option

Momentum bsbt

BS/BT   |   Single or Two-Stage Indoor Split Unit

The Commercial Series Split model is the next generation of geothermal innovation, incorporating best-in-class features into a compact, efficient and ultra quiet system. They can provide ducted heating and cooling, as well as domestic hot water and can also be used with a conventional furnace to create a dual-fuel system.

  • Capacity: 1.5 to 6 tons
  • Efficiency: Up to 28.8 EER / 4.4 COP
  • Voltages: 208/230V, 60Hz, 1Ph/3Ph
  • Copeland UltraTech 2-stage compressor
  • Factory installed desuperheater option

Revolution rt

RT   |   Two-Stage Outdoor Split Unit

The Hydron Module Commercial Series outdoor split system has a space-saving footprint making it an excellent choice for applications with limited clearance. The unit can be used alone or added to a conventional heating/cooling system.

  • Capacity: 2 to 5 tons
  • Efficiency: Up to 25.4 EER / 4.4 COP
  • Voltages: 208/230V, 60Hz, 1Ph
  • Copeland UltraTech® two-stage compressor
  • Built-in freeze protection
  • Factory installed desuperheater circuit option

Cruise wv

WV   |   Variable Speed Water-to-Water Unit

Our new Hydron Module variable-speed, variable-capacity heating and cooling system adjusts the BTUH output to match the load profile for desired comfort settings. With the help of an outdoor temperature sensor, the modulating compressor adjusts to deliver the perfect water temperatures for a radiant or hydronic system application. This is vital because the efficiency of a water-to-water geothermal unit increases significantly with lower water temperatures.

  • Capacity: Up to 5 tons
  • Efficiency: Up to 25.4 EER / 3.9 COP
  • Voltages: 208/230V, 60Hz, 1Ph
  • High Temperature Peformance
  • Electronic Expansion Valve
  • Variable-speed Pumps

Erc erc

ERC   |    Console Water-to-Air Unit

The Console Series provides a high efficiency ductless solution for spaces where individual, quiet control of the heating and cooling system is important. The Console Series exceeds ASHRAE 90.1 efficiencies, yet maintains small cabinet dimensions. The Console Series is an excellent choice for water loop or geothermal applications, and has no through-the-wall penetrations.

  • 4 Sizes available from ¾ ton to 1.5 tons
  • Environmentally-friendly R-410A zero ozone depletion refrigerant
  • TXV metering device for extended range operation
  • Advanced digital auto or manual change-over unit mounted control with temperature display, speed selection, and fault indication
  • Remote-mounted control available
  • Microprocessor controls standard with DDC control options
  • Multiple piping and air configurations to fit any application
  • Wide variety of options including e-coated air coils and ultra quiet construction
  • Available voltages: 115V, 60Hz, 1Ph; 208/230V, 60Hz, 1Ph; 265V, 60Hz, 1Ph

Ech ecv ech ecv

ECH-ECV   |    Compact Belt Drive Water-to-Air Unit

With many sizes available from six through 25 tons and multiple cabinet configurations, the Compact Series offers a wide range of units for most any installation. The Compact Series has an extended range refrigerant circuit, capable of geothermal applications, as well as boiler-tower applications. Microprocessor controls, galvanized steel cabinets, and high efficiency scroll compressors are just some of the standard features of the flexible Compact Series.

  • Horizontal sizes from 6 tons to 10 tons
  • Vertical sizes from 6 tons to 25 tons
  • Supply air discharge is field convertible on both horizontal and vertical models
  • Electrical box is on the right side, and it can be field converted to the left side of the unit
  • Electric power and water connections can enter from either side of front
  • Copeland scroll compressors
  • Dual refrigeration circuits (all models)
  • Exceeds ASHRAE 90.1 efficiencies
  • Waterside Economizer option available
  • TXV metering device for extended range operation
  • Available voltages: 208/230V, 60Hz, 3Ph; 460V, 60Hz, 3Ph; 575V, 60 Hz, 3Ph

Elv elv

ELV   |    Large Vertical Water-to-Air Unit

The Large Vertical Series raises the bar for water-source heat pump efficiencies, features, and application flexibility. Not only does the Large Vertical Series exceed ASHRAE 90.1 efficiencies, but it also uses R-410A zero ozone depletion refrigerant, making it an extremely environmentally-friendly option. The Large Vertical Series has many options and configurations to fit most applications.

  • Vertical sizes from 7 tons to 25 tons (Dual refrigeration circuits on units larger than 15 tons)
  • Unit configuration can be ordered with or converted to front or back return and top, front, or back discharge
  • Electrical box can be field converted to be on the front or back of the unit
  • Electric power can enter from any side of the unit
  • Water and drain can be connected to either side of the unit
  • Exceeds ASHRAE 90.1 efficiencies
  • TXV metering device for extended range operation
  • Microprocessor controls are standard with optional DDC controls
  • Hot water modulating reHeat option for perfect humidity control
  • Available voltages: 208/230V, 60Hz, 3Ph; 460V, 60Hz, 3Ph; 575V, 60Hz, 3Ph

Ere ere

ERE   |    Rooftop Water-to-Air Unit

The Rooftop Series provides an economical solution for today’s HVAC challenges. The Rooftop Series can introduce a fixed amount of outside air year-round or a modulating Economizer to provide free cooling when outdoor conditions are favorable. These units are designed for an extended range of source water temperatures, making it suitable for closed-loop, or ground source closed-loop systems. With high efficiency scroll compressors and belt drive motors, the rooftop series exceeds ASHRAE 90.1 efficiencies (40 percent better than standard rooftop units).

  • Available Sizes from 3 tons to 20 tons
  • Galvanized steel construction and powder coat paint on all units
  • Copeland Scroll compressors (dual circuited on sizes 8 tons and larger)
  • Microprocessor controls standard with optional DDC controls
  • Extended range operation package standard
  • Double wall construction for access doors and stainless steel hardware
  • Belt-drive blowers with various configurations for RPM/ESP settings
  • Hot water modulating reHeat option available
  • *** Available voltages: 208/230V, 60Hz, 3Ph; 460V, 60Hz, 3Ph; 575V, 60Hz, 3Ph